オリジナル版：http://dev.mysql.com/doc/refman/5.0/en/news-5-0-19.html
最も普及しているオープンソースデータベース管理システムであるMySQL 5.0.19がリリースされました。コミュニティエディションは、http://dev.mysql.com/downloads/とミラーサイトのダウンロード・ページから、ソースコード及び多くのプラットフォームのためのバイナリで現在利用可能です。
すべてのミラーサイトが現在、最新であるとは限らないことに注意してください。
あるミラーサイトでこのバージョンを見つけることができない場合は、再度確認を行うか、あるいは別のダウンロード・サイトを選択してください。
これは最近の製品バージョンのバグ修正バージョンです。
このバージョンで解消された個々のバグに関するその他の詳細については、http://bugs.mysql.com/のバグデータベースを参照してください。
あなたのご意見をお待ちしています。
以下は、変更ログからのニュースです。
Functionality added or changed:
* Incompatible change: The InnoDB storage engine no longer ignores
trailing spaces when comparing BINARY or VARBINARY column values.
This means that (for example) the binary values 'a' and 'a ' are now
regarded as unequal any time they are compared, as they are in
MyISAM tables. (Bug #14189 (http://bugs.mysql.com/14189))
See Section 11.4.2, "The BINARY and VARBINARY Types" for more
information about the BINARY and VARBINARY types.
* The result type of the GROUP_CONCAT() function is now VARCHAR only
if the the value of the group_concat_max_len system variable is less
than or equal to 512. Otherwise, this funciton returns a BLOB. (Bug
#14169 (http://bugs.mysql.com/14169))
* Added the mysql_upgrade program that checks all tables for
incompatibilities with the current version of MySQL Server and
repairs them if necessary. This program should be run for each MySQL
upgrade (rather than mysql_fix_privilege_tables). See Section 5.6.2,
"mysql_upgrade --- Check Tables for MySQL Upgrade."
* Added the FOR UPGRADE option for the CHECK TABLE statement. This
option checks whether tables are incompatible with the current
version of MySQL Server. Also added the --check-upgrade to
mysqlcheck that invokes CHECK TABLE with the FOR UPGRADE option.
* mysql no longer terminates data value display when it encounters a
NUL byte. Instead, it displays NUL bytes as spaces. (Bug #16859
(http://bugs.mysql.com/16859))
* Added the --wait-timeout option to mysqlmanager to allow
configuration of the timeout for dropping an inactive connection,
and increased the default timeout from 30 seconds to 28,800 seconds
(8 hours). (Bug #12674 (http://bugs.mysql.com/12674))
* A number of performance issues were resolved that had previously
been encountered when using statements that repeatedly invoked
stored functions. For example, calling BENCHMARK() using a stored
function executed much more slowly than when invoking it with inline
code that accomplished the same task. In most cases the two should
now execute with approximately the same speed. (Bug #15014
(http://bugs.mysql.com/15014), Bug #14946
(http://bugs.mysql.com/14946))
* libmysqlclient now uses versioned symbols with GNU ld. (Bug #3074
(http://bugs.mysql.com/3074))
* NDB Cluster: More descriptive warnings are now issued when
inappropriate logging parameters are set in config.ini. (Formerly,
the warning issued was simply Could not add logfile destination.)
(Bug #11331 (http://bugs.mysql.com/11331))
* Added the --port-open-timeout option to mysqld to control how many
seconds the server should wait for the TCP/IP port to become free if
it cannot be opened. (Bug #15591 (http://bugs.mysql.com/15591))
* Repeated invocation of my_init() and my_end() caused corruption of
character set data and connection failure. (Bug #6536
(http://bugs.mysql.com/6536))
* Two new Hungarian collations are included: utf8_hungarian_ci and
ucs2_hungarian_ci. These support the correct sort order for
Hungarian vowels. However, they do not support the correct order for
sorting Hungarian consonant contractions; this issue will be fixed
in a future release.
* Wording of error 1329 changed to No data - zero rows fetched,
selected, or processed. (Bug #15206 (http://bugs.mysql.com/15206))
* The INFORMATION_SCHEMA now skips data contained in
unlistable/unreadable directories rather than returning an error.
(Bug #15851 (http://bugs.mysql.com/15851))
* InnoDB now caches a list of unflushed files instead of scanning for
unflushed files during a table flush operation. This improves
performance when --innodb-file-per-table is set on a system with a
large number of InnoDB tables. (Bug #15653
(http://bugs.mysql.com/15653))
* The message for error 1109 changed from Unknown table ... in order
clause to Unknown table ... in field list. (Bug #15091
(http://bugs.mysql.com/15091))
* The mysqltest utility now converts all CR/LF combinations to LF to
allow test cases intended for Windows to work properly on UNIX-like
systems. (Bug #13809 (http://bugs.mysql.com/13809))
* The mysql_ping function will now retry if the reconnect flag is set
and error CR_SERVER_LOST is encountered during the first attempt to
ping the server. (Bug #14057 (http://bugs.mysql.com/14057))
* mysqldump now surrounds the DEFINER, SQL SECURITY DEFINER and WITH
CHECK OPTION clauses of a CREATE VIEW statement with "not in
version" comments to prevent errors in earlier versions of MySQL.
(Bug #14871 (http://bugs.mysql.com/14871))
Bugs fixed:
* Setting the myisam_repair_threads system variable to a value larger
than 1 could cause corruption of large MyISAM tables. (Bug #11527
(http://bugs.mysql.com/11527))
* When using the GROUP_CONCAT() function where the
group_concat_max_len system variable was greater than 512, the type
of the result was BLOB only if the query included an ORDER BY
clause; otherwise the result was a VARCHAR. (Bug #14169
(http://bugs.mysql.com/14169))
* The length of a VARCHAR() column that used the utf8 character set
would increase each time the table was re-created in a stored
procedure or prepared statement, eventually causing the CREATE TABLE
statement to fail. (Bug #13134 (http://bugs.mysql.com/13134))
* type_decimal failed with the prepared statement protocol. (Bug
#17826 (http://bugs.mysql.com/17826))
* The MySQL server could crash with out of memory errors when
performing aggregate functions on a DECIMAL column. (Bug #17602
(http://bugs.mysql.com/17602))
* A stored procedure failed to return data the first time it was
called per connection. (Bug #17476 (http://bugs.mysql.com/17476))
* Using DROP FUNCTION IF EXISTS func_name to drop a user-defined
function caused a server crash if the server was running with the
--skip-grant-tables option. (Bug #17595
(http://bugs.mysql.com/17595))
* Using ALTER TABLE to increase the length of a BINARY(M) column
caused column values to be padded with spaces rather than 0x00
bytes. (Bug #16857 (http://bugs.mysql.com/16857))
* A large BIGINT value specified in a WHERE clause could be treated
differently depending on whether it is specified as a quoted string.
(For example, WHERE bigint_col = 17666000000000000000 versus WHERE
bigint_col = '17666000000000000000'). (Bug #9088
(http://bugs.mysql.com/9088))
* A natural join between INFORMATION_SCHEMA tables failed. (Bug #17523
(http://bugs.mysql.com/17523))
* A memory leak caused warnings on slaves for certain statements that
executed without warning on the master. (Bug #16175
(http://bugs.mysql.com/16175))
* The embedded server did not allow binding of columns to the
MYSQL_TYPE_VAR_STRING data type in prepared statements. (Bug #12070
(http://bugs.mysql.com/12070))
* The embedded server failed various tests in the automated test
suite. (Bug #9630 (http://bugs.mysql.com/9630), Bug #9631
(http://bugs.mysql.com/9631), Bug #9633
(http://bugs.mysql.com/9633), Bug #10801
(http://bugs.mysql.com/10801), Bug #10911
(http://bugs.mysql.com/10911), Bug #10924
(http://bugs.mysql.com/10924), Bug #10925
(http://bugs.mysql.com/10925), Bug #10926
(http://bugs.mysql.com/10926), Bug #10930
(http://bugs.mysql.com/10930), Bug #15433
(http://bugs.mysql.com/15433))
* Instance Manager erroneously accepted a list of instance identifiers
for the START INSTANCE and STOP INSTANCE commands (should accept
only a single identifier). (Bug #12813
(http://bugs.mysql.com/12813))
* For a transaction that used MyISAM and InnoDB tables, interruption
of the transaction due to a dropped connection on a master server
caused slaves to lose synchrony. (Bug #16559
(http://bugs.mysql.com/16559))
* SELECT with GROUP BY on a view can cause a server crash. (Bug #16382
(http://bugs.mysql.com/16382))
* If the query optimizer transformed a GROUP BY clause in a subquery,
it did not also transform the HAVING clause if there was one,
producing incorrect results. (Bug #16603
(http://bugs.mysql.com/16603))
* SUBSTRING_INDEX() could yield inconsistent results when applied with
the same arguments to consecutive rows in a query. (Bug #14676
(http://bugs.mysql.com/14676))
* The parser allowed CREATE AGGREGATE FUNCTION for creating stored
functions, even though AGGREGATE does not apply. (It is used only
for CREATE FUNCTION only when creating user-defined functions.) (Bug
#16896 (http://bugs.mysql.com/16896))
* Data truncations on non-UNIQUE indexes could crash InnoDB when using
multi-byte character sets. (Bug #17530
(http://bugs.mysql.com/17530))
* Triggers created without BEGIN and END clauses could not be properly
restored from a mysqldump file. (Bug #16878
(http://bugs.mysql.com/16878))
* The RENAME TABLE statement did not move triggers to the new table.
(Bug #13525 (http://bugs.mysql.com/13525))
* Clients compiled from source with the --without-readline did not
save command history from session to session. (Bug #16557
(http://bugs.mysql.com/16557))
* Stored routines that contained only a single statement were not
written properly to the dumpfile when using mysqldump. (Bug #14857
(http://bugs.mysql.com/14857))
* For certain MERGE tables, the optimizer wrongly assumed that using
index_merge/intersection was too expensive. (Bug #17314
(http://bugs.mysql.com/17314))
* Executing a SHOW CREATE VIEW query of an invalid view caused the
mysql_next_result function of libMySQL.dll to hang. (Bug #15943
(http://bugs.mysql.com/15943))
* BIT fields were not properly handled when using row-based
replication. (Bug #13418 (http://bugs.mysql.com/13418))
* Issuing GRANT EXECUTE on a procedure would display any warnings
related to the creation of the procedure. (Bug #7787
(http://bugs.mysql.com/7787))
* NDB Cluster: ndb_delete_all would run out of memory on tables
containing BLOB columns. (Bug #16693 (http://bugs.mysql.com/16693))
* NDB Cluster: UNIQUE keys in Cluster tables were limited to 225 bytes
in length. (Bug #15918 (http://bugs.mysql.com/15918))
* In a highly concurrent environment, a server crash or deadlock could
result from execution of a statement that used stored functions or
activated triggers coincident with alteration of the tables used by
these functions or triggers. (Bug #16593
(http://bugs.mysql.com/16593))
* Previously, a stored function invocation was written to the binary
log as DO func_name() if the invocation changes data and occurs
within a non-logged statement, or if the function invokes a stored
procedure that produces an error. These invocations now are logged
as SELECT func_name() instead for better control over error code
checking (slave servers could stop due to detecting a different
error than occurred on the master). (Bug #14769
(http://bugs.mysql.com/14769))
* CHECKSUM TABLE returned different values on MyISAM table depending
on whether the QUICK or EXTENDED options were used. (Bug #8841
(http://bugs.mysql.com/8841))
* MySQL server dropped client connection for certain SELECT statements
against views defined that used MERGE algorithm. (Bug #16260
(http://bugs.mysql.com/16260))
* A call to the IF() function using decimal arguments could return
incorrect results. (Bug #16272 (http://bugs.mysql.com/16272))
* A statement containing GROUP BY and HAVING clauses could return
incorrect results when the HAVING clause contained logic that
returned FALSE for every row. (Bug #14927
(http://bugs.mysql.com/14927))
* Using GROUP BY on column used in WHERE clause could cause empty set
to be returned. (Bug #16203 (http://bugs.mysql.com/16203))
* For a MySQL 5.0 server, using MySQL 4.1 tables in queries with a
GROUP BY clause could result in buffer overrun or a server crash.
(Bug #16752 (http://bugs.mysql.com/16752))
* SET sql_mode = N, where N > 31, did not work properly. (Bug #13897
(http://bugs.mysql.com/13897))
* NDB Cluster: Cluster log file paths were truncated to 128
characters. They may now be as long as MAX_PATH (the maximum path
length permitted by the operating system). (Bug #17411
(http://bugs.mysql.com/17411))
* The mysql_stmt_store_result() C API function could not be used for a
prepared statement if a cursor had been opened for the statement.
(Bug #14013 (http://bugs.mysql.com/14013))
* The mysql_stmt_sqlstate() C API function incorrectly returned an
empty string rather than '00000' when no error occurred. (Bug #16143
(http://bugs.mysql.com/16143))
* Using the TRUNCATE() function with a negative number for the second
argument on a BIGINT column returned incorrect results. (Bug #8461
(http://bugs.mysql.com/8461))
* Instance Manager searched wrong location for password file on some
platforms. (Bug #16499 (http://bugs.mysql.com/16499))
* NDB Cluster: Following multiple forced shutdowns and restarts of
data nodes, DROP DATABASE could fail. (Bug #17325
(http://bugs.mysql.com/17325))
* NDB Cluster: An UPDATE with an inner join failed to match any
records if both tables in the join did not have a primary key. (Bug
#17257 (http://bugs.mysql.com/17257))
* NDB Cluster: A DELETE with a join in the WHERE clause failed to
retrieve any records if both tables in the join did not have a
primary key. (Bug #17249 (http://bugs.mysql.com/17249))
* The error message returned by perror --ndb was prefixed with OS
error code: instead of NDB error code:. (Bug #17235
(http://bugs.mysql.com/17235))
* NDB Cluster: In some cases, LOAD DATA INFILE did not load all data
into NDB tables. (Bug #17081 (http://bugs.mysql.com/17081))
* NDB Cluster: The REDO log would become corrupted (and thus
unreadable) in some circumstances, due to a failure in the query
handler. (Bug #17295 (http://bugs.mysql.com/17295))
* NDB Cluster: No error message was generated for setting
NoOfFragmentLogFiles too low. (Bug #13966
(http://bugs.mysql.com/13966))
* NDB Cluster: No error message was generated for setting
MaxNoOfAttributes too low. (Bug #13965
(http://bugs.mysql.com/13965))
* Binary distributions for Solaris contained files with group
ownership set to the non-existing wheel group. Now the bin group is
used. (Bug #15562 (http://bugs.mysql.com/15562))
* The DECIMAL data type was not being handled correctly with prepared
statements. (Bug #16511 (http://bugs.mysql.com/16511))
* The SELECT privilege was required for triggers that performed no
selects. (Bug #15196 (http://bugs.mysql.com/15196))
* The UPDATE privilege was required for triggers that performed no
updates. (Bug #15166 (http://bugs.mysql.com/15166))
* CAST(... AS TIME) operations returned different results when using
versus not using prepared-statement protocol. (Bug #15805
(http://bugs.mysql.com/15805))
* Improper memory handling for stored routine variables could cause
memory overruns and binary log corruption. (Bug #15588
(http://bugs.mysql.com/15588))
* Killing a long-running query containing a subquery could cause a
server crash. (Bug #14851 (http://bugs.mysql.com/14851))
* A FULLTEXT query in a prepared statement could result in unexpected
behavior. (Bug #14496 (http://bugs.mysql.com/14496))
* A RETURN statement within a trigger caused a server crash. RETURN
now is disallowed within triggers. To exit immediately, use LEAVE.
(Bug #16829 (http://bugs.mysql.com/16829))
* STR_TO_DATE(1,NULL) caused a server crash. (Bug #15828
(http://bugs.mysql.com/15828))
* An invalid stored routine could not be dropped. (Bug #16303
(http://bugs.mysql.com/16303))
* When evaluation of the test in a CASE failed in a stored procedure
that contained a CONTINUE handler, execution resumed at the
beginning of the CASE statement instead of at the end. (Bug #16568
(http://bugs.mysql.com/16568))
* An INSERT statement in a stored procedure corrupted the binary log.
(Bug #16621 (http://bugs.mysql.com/16621))
* When MyODBC or any other client called my_init()/my_end() several
times, it caused corruption of charset data stored in once_mem_pool.
(Bug #11892 (http://bugs.mysql.com/11892))
* When multiple handlers are created for the same MySQL error number
within nested blocks, the outermost handler took precedence. (Bug
#15011 (http://bugs.mysql.com/15011))
* Certain LEAVE statements in stored procedures were not properly
optimized. (Bug #15737 (http://bugs.mysql.com/15737))
* Setting InnoDB path settings to an empty string caused InnoDB
storage engine to crash upon server startup. (Bug #16157
(http://bugs.mysql.com/16157))
* InnoDB used full explicit table locks in trigger processing. (Bug
#16229 (http://bugs.mysql.com/16229))
* Server crash when dropping InnoDB constraints named
TABLENAME_ibfk_0. (Bug #16387 (http://bugs.mysql.com/16387))
* Corrected race condition when dropping the adaptive hash index for a
B-tree page in InnoDB. (Bug #16582 (http://bugs.mysql.com/16582))
* MYSQL_OPT_RECONNECT option was modified by calls to the
mysql_real_connect() function. (Bug #15719
(http://bugs.mysql.com/15719))
* InnoDB: After upgrading an InnoDB table having a VARCHAR BINARY
column created in MySQL 4.0 to MySQL 5.0, update operations on the
table would cause the server to crash. (Bug #16298
(http://bugs.mysql.com/16298))
* Trying to compile the server on Windows generated a stack overflow
warning due to a recursive definition of the internal
Field_date::store() method. (Bug #15634
(http://bugs.mysql.com/15634))
* The use of LOAD INDEX within a stored routine was permitted and
caused the server to crash. Note: LOAD INDEX statements within
stored routines are not supported, and now yield an error if
attempted. This behavior is intended. (Bug #14270
(http://bugs.mysql.com/14270))
* The mysqlbinlog utility did not output DELIMITER statements, causing
syntax errors for stored routine creation statements. (Bug #11312
(http://bugs.mysql.com/11312))
* NDB Cluster returned incorrect Can't find file error for OS error
24, changed to Too many open files. (Bug #15020
(http://bugs.mysql.com/15020))
* Performing a RENAME TABLE on an InnoDB table when the server is
started with the --innodb-file-per-table and the data directory is a
symlink caused a server crash. (Bug #15991
(http://bugs.mysql.com/15991))
* The mysql_stmt_attr_get function returned an unsigned int instead of
a boolean for STMT_ATTR_UPDATE_MAX_LENGTH. (Bug #16144
(http://bugs.mysql.com/16144))
* Multi-byte path names for LOAD DATA and SELECT ... INTO OUTFILE
caused errors. Added the character_set_filesystem system variable,
which controls the interpretation of string literals that refer to
filenames. (Bug #12448 (http://bugs.mysql.com/12448))
* Certain subqueries where the inner query is the result of a
aggregate function would return different results on MySQL 5.0 than
on MySQL 4.1. (Bug #15347 (http://bugs.mysql.com/15347))
* Attempts to create FULLTEXT indexes on VARCHAR columns larger than
1000 bytes resulted in error. (Bug #13835
(http://bugs.mysql.com/13835))
* Characters in the gb2312 and euckr character sets which did not have
Unicode mappings were truncated. (Bug #15377
(http://bugs.mysql.com/15377))
* Certain nested LEFT JOIN operations were not properly optimized.
(Bug #16393 (http://bugs.mysql.com/16393))
* GRANT statements specifying schema names that included underscore
characters (i.e. my_schema) did not match if the underscore was
escaped in the GRANT statement (i.e. GRANT ALL ON `my\_schema` ...).
(Bug #14834 (http://bugs.mysql.com/14834))
* Running out of diskspace in the location specified by the tmpdir
option resulted in incorrect error message. (Bug #14634
(http://bugs.mysql.com/14634))
* Test suite sp test left behind tables when the test failed that
could cause future tests to fail. (Bug #15866
(http://bugs.mysql.com/15866))
* UPDATE statement crashed multi-byte character set FULLTEXT index if
update value was almost identical to initial value only differing in
some spaces being changed to . (Bug #16489
(http://bugs.mysql.com/16489))
* A SELECT query which contained a GROUP_CONCAT() and an ORDER BY
clause against the INFORMATION_SCHEMA resulted in an empty result
set. (Bug #15307 (http://bugs.mysql.com/15307))
* The --replicate-do and --replicate-ignore options were not being
enforced on multiple-table statements. (Bug #15699
(http://bugs.mysql.com/15699), Bug #16487
(http://bugs.mysql.com/16487))
* A prepared statement created from a SELECT ... LIKE query (such as
PREPARE stmt1 FROM 'SELECT col_1 FROM tedd_test WHERE col_1 LIKE
?';) would begin to produce erratic results after being executed
repeatedly numerous (thousands) of times. (Bug #12734
(http://bugs.mysql.com/12734))
* The server would crash when the size of an ARCHIVE table grew beyond
2GB. (Bug #15787 (http://bugs.mysql.com/15787))
* Created a user function with an empty string (that is, CREATE
FUNCTION ''()), was accepted by the server. Following this, calling
SHOW FUNCTION STATUS would cause the server to crash. (Bug #15658
(http://bugs.mysql.com/15658))
* In some cases the query optimizer did not properly perform multiple
joins where inner joins followed left joins, resulting in corrupted
result sets. (Bug #15633 (http://bugs.mysql.com/15633))
* The absence of a table in the left part of a left or right join was
not checked prior to name resolution, which resulted in a server
crash. (Bug #15538 (http://bugs.mysql.com/15538))
* NDBCluster: A bitfield whose offset and length totaled 32 would
crash the cluster. (Bug #16125 (http://bugs.mysql.com/16125))
* NDBCluster: Upon the completion of a scan where a key request
remained outstanding on the primary replica and a starting node
died, the scan did not terminate. This caused incompleted error
handling of the failed node. (Bug #15908
(http://bugs.mysql.com/15908))
* NDBCluster: The ndb_autodiscover test failed sporadically due to a
node not being permitted to connect to the cluster. (Bug #15619
(http://bugs.mysql.com/15619))
* NDBCluster: When running more than one management process in a
cluster:
+ ndb_mgm -c host:port -e "node_id stop" would stop a management
process running only on the same system on which the command
was issued.
+ ndb_mgm -e "shutdown" failed to shut down any management
processes at all.
(Bug #12045 (http://bugs.mysql.com/12045), Bug #12124
(http://bugs.mysql.com/12124))
* The contents of fill_help_tables.sql could not be loaded in strict
SQL mode. (Bug #15760 (http://bugs.mysql.com/15760))
* fill_help_tables.sql was not included in binary distributions for
several platforms. (Bug #15759 (http://bugs.mysql.com/15759))
* An INSERT ... SELECT statement between tables in a MERGE set can
return errors when statement involves insert into child table from
merge table or vice-versa. (Bug #5390 (http://bugs.mysql.com/5390))
* Certain permission management statements could create a NULL
hostname for a user, resulting in a server crash. (Bug #15598
(http://bugs.mysql.com/15598))
* A COMMIT statement followed by a ALTER TABLE statement on a BDB
table caused server crash. (Bug #14212
(http://bugs.mysql.com/14212))
* A DELETE statement involving a LEFT JOIN and an IS NULL test on the
right-hand table of the join crashed the server when the
innodb_locks_unsafe_for_binlog option was enabled. (Bug #15650
(http://bugs.mysql.com/15650))
* Performing an ORDER BY on an indexed ENUM column returned error.
(Bug #15308 (http://bugs.mysql.com/15308))
* The NOT FOUND condition handler for stored procedures did not
distinguish between a NOT FOUND condition and an exception or
warning. (Bug #15231 (http://bugs.mysql.com/15231))
* A stored procedure with an undefined variable and an exception
handler would hang the client when called. (Bug #14498
(http://bugs.mysql.com/14498))
* Subselect could return wrong results when records cache and grouping
was involved. (Bug #15347 (http://bugs.mysql.com/15347))
* Temporary table aliasing did not work inside stored functions. (Bug
#12198 (http://bugs.mysql.com/12198))
* MIN() and MAX() operations were not optimized for views. (Bug #16016
(http://bugs.mysql.com/16016))
* Using an aggregate function as the argument for a HAVING clause
would result in the aggregate function always returning FALSE. (Bug
#14274 (http://bugs.mysql.com/14274))
* Parallel builds occasionally failed on Solaris. (Bug #16282
(http://bugs.mysql.com/16282))
* The FORCE INDEX keyword in a query would prevent an index merge from
being used where an index merge would normally be chosen by the
optimizer. (Bug #16166 (http://bugs.mysql.com/16166))
* The COALESCE() function truncated data in a TINYTEXT column. (Bug
#15581 (http://bugs.mysql.com/15581))
* InnoDB: Comparison of indexed VARCHAR CHARACTER SET ucs2 COLLATE
ucs2_bin columns using LIKE could fail. (Bug #14583
(http://bugs.mysql.com/14583))
* An attempt to open a table that requires a disabled storage engine
could cause a server crash. (Bug #15185
(http://bugs.mysql.com/15185))
* Issuing a DROP USER command could cause some users to encounter a
hostname is not allowed to connect to this MySQL server error. (Bug
#15775 (http://bugs.mysql.com/15775))
* Setting innodb_log_file_size to a value greater than 4G crashed the
server. (Bug #15108 (http://bugs.mysql.com/15108))
* A SELECT of a stored function that references the INFORMATION_SCHEMA
could crash the server. (Bug #15533 (http://bugs.mysql.com/15533))
* Tarball install package was missing a proper fill_help_tables.sql
file. (Bug #15151 (http://bugs.mysql.com/15151)